Surface mounted magnetic lock with integrated handles

Surface mounted magnetic lock with integrated handles

Item No. D00000024 - MAG

Screw-on electromagnetic lock for access control. Available in 2 versions. MAG3000 with 300 kg and MAG6000 with 600 kg pulling force. The aluminium powder coated housing with integrated design handles gives your access control gate that extra touch. Stop losing precious time with welding boxes; drilling 7 holes does the job. The Quick-Fix enables a fast and strong fixing. A two layer, protective coating guarantees that our electromagnetic locks are ready for years of worry-free use outside.

2 product(s) found

Surface mounted magnetic lock with integrated handles - MAG6000

Item No. P00007681

Surface mounted magnetic lock with integrated handles - For square posts and gate profiles of 40 mm to 80 mm, 600 kg pulling force with 3006PULL - Various colours

Surface mounted magnetic lock with integrated handles - MAG3000

Item No. P00007627

Surface mounted magnetic lock with integrated handles - For square posts and gate profiles of 40 mm to 80 mm, 300 kg pulling force with 3006PULL - Various colours

Specifications
Drawings
Installation Movies
Downloads

Specifications

Specifications	Guaranteed holding force tested on every magnetic lock 500h salt spray resistant! SGS certified (ISO 9227) Tested according to ISO 9227 Special two-layer protective coating developed for outdoor use Powder coated aluminium housing Anti-residual magnetism kick-off system Raised edge on the magnet housing makes it impossible to put a crowbar between the magnet and the armature plate Fail open Fast and easy fixing by means of 5 holes with Quick-Fix Voltage: 12V / 24V DC MAG3000: Minimal pulling force: 3000N (300 kg) MAG6000: Minimal pulling force: 6000N (600 kg) Current MAG3000: 500 mA / 12 V or 250 mA / 24 V Current MAG6000: 460 mA /12 V or 230 mA / 24 V IP68 rated - Extremely resistant to water and dust
Available in following RAL-colours
Features